Head for MiniMill / 301LP

STWRMH - Strength Weld Removal Bit: HSS 6% Cobalt | Degree: 37.5°
Custom designed head dedicated for strength weld removal. The heads are sized per tube diameter and are precisely engineered so that the inserts cannot damage the shaft or locking jaws.  Simple, trouble-free set up makes these heads very advantageous.

TFMH - Tube Facing Miling Head Bit: HSS 6% Cobalt | Degree: 90.0°
A tube facing milling head created for facing tubes made of any type of material. Utilizes 6% cobalt inserts.

OBMH - Outside Bevel Milling Head Bit: HSS 6% Cobalt | Degree: 37.5°
Dedicated for the outside beveling of both tubes and pipes. Sized per tube or pipe diameter and angle of required ld bevel. The heads are precisely engineered so that the inserts cannot damage the shaft or locking jaws.

OBMH - Outside Bevel Miling Head Bit: HSS 6% Cobalt | Degree: 37.5°
Specially designed head for membrane removal and overlay head (cladding removal)

SWROTC - Tube Facing Miling Head Bit: HSS 6% Cobalt
A seal weld removal head over tube circumference prior to re-welding the damaged joint without removing the tube.